Thistle GypPrime

This special primer modifies surfaces to help retain water and prevent adhesion failures when plastering onto very dry or high suction backgrounds.

Thistle GypPrime makes your job easier, giving you extra working time by reducing the suction base to prevent rapid drying.

It's easy to apply by roller, brush or spray, and is coloured yellow so you can see where you've treated. When the primer is diluted, it can cover up to 600 square metres. However, you can also apply it neat to correct extremely dry surfaces

• Lengthens the working time of plasters on very high suction background by helping them retain water, and minimises potential for adhesion failure caused by rapid dry-out
• Yellow in colour - easy to avoid missing any areas
• Can be diluted - normally 1 part to 5 parts water provides adequate suction control, or can be used neat if necessary to control extremely severe suction
• One tub covers up to 600 sq.m (diluted 1:5) or 100 sq.m undiluted
• Easily applied by suitable roller, brush or spray Large container allows application directly from the tub
• Helps to consolidate dusty backgrounds